#!/bin/bash echo "Please enter the following:" read -p 'First and Last name: ' name read -p 'Callsign: ' callsign read -p "APRS ssid: $callsign-" ssid echo echo "If you need your APRS Passcode you can get it here: https://willamettevalleymesh.net/aprs-passcode/" read -p 'Please enter callsign APRS Passcode: ' aprspasscode read -p 'Your Email Address: ' email apt update -y apt upgrade -y apt install -y sudo build-essential htop nginx libevent* debhelper libssl-dev libcap-dev libz-dev libwww-perl apt --fix-broken install adduser --system --no-create-home --home /var/run/aprsc --shell /usr/sbin/nologin --group aprsc cd wget http://he.fi/aprsc/down/aprsc-latest.tar.gz tar xvfz aprsc-latest.tar.gz rm -rf aprsc-latest.tar.gz cd aprsc-* cd src ./configure make make-deb sudo dpkg -i ../aprsc_*.deb sudo systemctl enable aprsc tee /etc/default/aprsc <<EOF # # STARTAPRSC: start aprsc on boot. Should be set to "yes" once you have # configured aprsc. # STARTAPRSC="yes" # # Additional options that are passed to the Daemon. # Description of used options (don't change these unless # you're sure what you're doing): # -u aprsc: switch to user 'aprsc' as soon as possible # -t /opt/aprsc: chroot to the given directory # -f: fork to a daemon # -e info: log at level info # -o file: log to file # -r logs: log files are placed in /opt/aprsc/logs # -c etc/aprsc.conf: configuration file location # # Since the daemon chroots to /opt/aprsc, all paths are relative to # that directory and the daemon cannot access any files outside # the chroot. # # aprsc can log to syslog too, but that'd require bringing the # syslog socket within the chroot. # DAEMON_OPTS="-u aprsc -t /opt/aprsc -f -e info -o file -r logs -c etc/aprsc.conf" EOF echo "ServerId $callsign-$ssid" > /opt/aprsc/etc/aprsc.conf echo "PassCode $aprspasscode" >> /opt/aprsc/etc/aprsc.conf echo "MyAdmin \"$name, $callsign\"" >> /opt/aprsc/etc/aprsc.conf echo "MyEmail $email" >> /opt/aprsc/etc/aprsc.conf tee -a /opt/aprsc/etc/aprsc.conf <<EOF ### Directories ######### # Data directory (for persistent state files - currently none) RunDir data # If logging to a file (-o file), enable built-in log rotation. # LogRotate <megabytes> <filecount> # "LogRotate 10 5" keeps 5 old files of 10 megabytes each. LogRotate 10 5 ### Intervals and timers ######### # Interval specification format examples: # 600 (600 seconds), or 600s, 5m, 2h, 1h30m, 1d3h15m24s, etc... # When no data is received from an upstream server in N seconds, switch to # another server. UpstreamTimeout 15s # When no data is received from a downstream server in N seconds, disconnect ClientTimeout 48h ### TCP listener ########## # Listen <socketname> <porttype> tcp <address to bind> <port> <options...> # socketname: any name you wish to show up in logs and statistics # porttype: one of: # fullfeed - everything, after dupe filtering # igate - igate / client port with user-specified filters # udpsubmit - UDP packet submission port (8080) # dupefeed - duplicate packets dropped by the server # options: # filter "m/500" - force a filter for users connected here # maxclients 100 - limit clients connected on this port # acl etc/client.acl - match client addresses against ACL # hidden - don't show the port in the status page # # If you wish to provide UDP service for clients, set up a # second listener on the same address, port and protocol. # # The "::" is IPv6 "IN6ADDR_ANY", whereas "0.0.0.0" is same # with IPv4. # # On FreeBSD you need to have separate listeners for IPv4 and # IPv6. On Linux, just use :: alone - the IPv6 listener will # catch the IPv4 connections just as well. # # Example of normal server ports for Linux, supporting both TCP and UDP, # IPv4 and IPv6: # Listen "Full feed" fullfeed tcp :: 10152 hidden Listen "" fullfeed udp :: 10152 hidden Listen "Client-Defined Filters" igate tcp :: 14580 Listen "" igate udp :: 14580 Listen "350 km from my position" igate tcp :: 20350 filter "m/350" Listen "" igate udp :: 20350 filter "m/350" Listen "UDP submit" udpsubmit udp :: 8080 ### Uplink configuration ######## # Uplink <name> <type> tcp <address> <port> # name: a name of the server or service you're connecting to # type: one of: # full - full feed # ro - read-only, do not transmit anything upstream # # If you wish to specify multiple alternative servers, use multiple # Uplink lines, one for each server. # # Normally a single line for the 'rotate' address is fine - it will connect # to one of the servers in a random fashion and go for another one should # the first one become unavailable. # Uplink "Core rotate" full tcp rotate.aprs.net 10152 #Uplink "Core rotate" ro tcp rotate.aprs.net 10152 # OPTIONAL: Bind source address before connecting to an uplink # You can enter two addresses, one for IPv4 and one for IPv6 connections. # Needed if you have multiple IP addresses on your server and only one # of them is allowed to connect by the remote server. #UplinkBind 127.0.0.1 #UplinkBind ::1 ### HTTP server ########## # HTTPStatus port provides a status view to web browsers. # IPv6+IPv4 support works slightly differently than in Listen: # :: is "all addresses" for IPv6, 0.0.0.0 for IPv4, but # :: only works if you actually have a global IPv6 address # configured on the system. # The example is for IPv4, change the address to :: if you have # IPv6. For FreeBSD, or if you wish to support multiple specific # ports/addresses, use multiple HTTPStatus directives for each. HTTPStatus 0.0.0.0 14501 # HTTPUpload port allows position uploads over HTTP HTTPUpload 0.0.0.0 8080 ### Environment ############ # When running this server as super-user, the server can (in many systems) # increase several resource limits, and do other things that less privileged # server can not do. # # The FileLimit is resource limit on how many simultaneous connections and # some other internal resources the system can use at the same time. # If the server is not being run as super-user, this setting has no effect # in case it is above what normal user can set. # FileLimit 10000 ### Operator attention span qualification run ########### # After configuring the rest of the settings, remove this bad command # from the configuration file. It's here only to avoid starting the # server up accidentally with an invalid configuration. #MagicBadness 42.7 EOF sudo systemctl enable aprsc reboot